Aristel SLT70 User's Guide download pdf (Page 28)

Telephone Router Setting User Guide

Aristel Networks Pty Ltd 4x4 PABX/Router User Guide and Setting Tool Programming Rev 3.6

Installation and programming.

1. Install Aristel PABX 4x4 &Two Way Router at suitable place and power

on. Check red LED flashing.

2. Terminate lines 1 and 2.

3. Connect AN1001 GSM dialer to Line 4

4. Install Aristel Multiphones SLT70 on the Tele ports 1, 3 and 4

5. Connect Engenus SN902 long range phone as Tele 2

6. Connect the Com port of the PABX to the PC com port using the cable

provided.

7. Power on PC

8. Load the CD provided on your PC and copy the whole content into a

separate folder of your PC..

9. Open the folder and double click RouterSet icon.

10. Telephone Router Setting screen will appear.

11. On top of the screen click Comm Set.

12. A small Comm Set screen will appear. Select your COM port and select

Baud Rate 9600 and save,

13. Main Parameters screen will appear.

14. Now, click “Send Data to Device” to send raw data to the router. Then

click “Read Data” to read data from the PABX/Router.

15. There are 3 windows. 1 Main Parameters 2. Router numbers 3. Replace dial

Numbers.

16. Enter the following data into each screen and then save the data by clicking

“Send Data to Device”

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Aristel SLT70 User's Guide Page 28