Aristel SLT70 User Manual download pdf (Page 40)

Revised by R. Robinson Issue DV2.3 21 November 2006 39

Zone 300 System Reset

Default value = 0

Range = (1 ~ 3)

This Zone allows the programmer to reset the system data to the default settings. It is recommended that every

system should be reset before programming for the first time.

DATA ENTERED SYSTEM DATA SYSTEM SPEED

DIAL CODES

ALL ROOM

RECORDS

ALL ROOMS

CHECKED OUT

1 RESET NOT RESET RESET NO

2 RESET RESET RESET YES

4 NOT RESET NOT RESET RESET NO

Related Zones. All Zones

Zone 301 Set (PASSWORDS)

Default value = See individual sets (passwords)

Range = Not Applicable

This Zone sets the Password(s) as required by the user.

Set 01. Programming Password. P-PROG

Sets a required password before programming can commence.

Default = dddddddd

Set 02. SMDR & SOS Password. P-SMDR

Sets a required password to lock or unlock the SMDR port and to reset the SOS alarm (#55) & (#57).

With SMDR locked:-

AV8 stores 100 calls

AV38 & DV38 store 100 calls

AV16 stores 50 calls

AV24 stores 25 calls

AV256 stores 250 calls or 1160 calls for DH64

Default = dddddddd

Set 03. DISA Password. P-DISA

Sets a required password for a DISA caller to access a relay function or a free CO line

Default = ----dddd

Set 04. Toll free password P-TOLL

Sets a required password over-ride all Toll restrictions.

Default = ----dddd

Set 05. Incoming Paging Password P-PAGE

This function requires a Voice Service Card.

Sets a required password for a DISA caller to access the Paging facility.

Default = ----dddd

Set 06. Reserved Passwd

Reserved for a future required password

Default = ----dddd

Set 07. Remote Programming Password Pmodem

Sets a required password for entering remote programming mode.

Default = ----dddd

Set 08. Headset Password P-HEAD

Sets a required password for a user to enter/leave Headset mode.

Default = dddddddd

Set 11. Remote Voice Mail Access P-VM

Sets a required password for external access to retrieve VM messages.

Default = ----dddd

Set 12. VoIP CLI to be sent P-VOIP

Sets the number to be sent as CLI when making a VoIP call.

Default = ----dddd (actually 1234)

Related Zones. Various Zones are affected by the passwords.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 65 66

Comments to this Manuals

No comments

Aristel SLT70 User Manual Page 40

Comments to this Manuals

Related products and manuals for Telephones Aristel SLT70